APW Wyott X TRM-2 Owner's Manual page 7

Step 1: Remove (1) screw from
Screws circled in red in Fig. A
Step 3: Use (4) 1/4-20 bolts and (4)
washers to attach the frame HC-Z24538
to the bottom side of the upper unit by
aligning the holes in the frame with the
leg mount holes in the unit.
See red lines for hole locations in Fig. C
Fig. A
Fig. C
7
Fig. B
Step 2: Remove all (4) legs
from upper unit.
Legs circled in red in Fig. B