Quick Start Guide; Overview - Gigahertz Solutions NFA 30M Operating Manual

3d lf magnetic field analyzer with data logger

Hide thumbs Also See for NFA 30M:

Table of Contents

Made in Germany

1 Quick Start Guide

After switching on, the CPU boots, performs some self-tests and then

automatically starts measuring. After switching off, please do not turn it

back on while the status LED is red to allow the processor to shut

down properly.

"Signal" -> default setting is tRMS

"On" = Measurement

"Log" = Long term recording

Double-click NFAsoft and follow your intuition for an evaluation of the

data recorded on the SD-card.

Should the meter not do what you expect, please have a look the

chapter on FAQ (frequently asked questions) at the end of this manual

(Chapter 9).

2 Overview: Front Cover

Technical data and specifications are to be found on our website.

- 1 -

April 2020

Table of Contents