Gigahertz Solutions NFA 30M Operating Manual page 16

Made in Germany
7.2 User-specific Configuration of
the NFA
The selected settings can be saved on the SD card as „CONFIG.NFA".
The NFA will then automatically load them upon its restart. Please note
that it is not possible to read the file in order to verify the selected set-
tings of the NFA.
Several customized pre-settings for NFAsoft can be defined allowing a
quick access. Simply select the settings as required and activate the
button "save as pre-setting for NFAsoft". All pre-settings are stored in
the file "NFAsoft.ini" and are available for NFAsoft provided that this file
is in the same folder.
Functions concerning E-fields are not available in thebNFA30M.
For a synchronization of the time, connect the NFA (with SD card!) to
the computer with the USB cable. Synchronization happens automati-
cally, as soon as "CONFIG.NFA" is saved to the SD card. If a larger
time lag persists, only a new SD card will help (simple SDHC from
SANDISK with a maximum of 16 GB, even a re-formatting usually does
not provide a solution. The SD cards are unfortunately the main cause
of error in the NFA.)
April 2020
- 14 -
© Gigahertz Solutions GmbH