Table of Contents
Advertisement
Step 4: Review Windows Configuration
User Data Backup
All user data should be regularly backed up to an external memory device. This
can be done across a network or to a USB device. Your IT department may
already have a backup strategy which is suitable for the system and data. Also,
user data back up should be done just prior to sending the controller back to
Keysight for service.
System Backup and Recovery
A Microsoft Windows operating system is the only operating system installed on
your M9038A. There is a small system partition for the Keysight Recovery System
on the SSD. During the boot process, you are given the choice to boot to
Windows normally or boot from the recovery partition. Refer to the M9038A User
Guide for detailed information.
Auto Login
Your M9038A Windows default behavior is to automatically login to the
Administrator account every time it boots. You do not need to type a password.
Default Administrator Password: Keysight4u!
They Keysight standard for the Administrator password is Keysight4u!
Your M9038A Administrator account is most likely is set with this password. If it
is not set with this password, then there is no password.
Change Administrator Password
The default Administrator password is public knowledge. Keysight recommends
that you change your password for improved security.
How to change your password for "Windows 10 Enterprise LTSC":
Keysight M9038A PXIe Embedded Controller Startup Guide
Anyone who knows your current Administrator password can
change the password. When you change your password you must
enter the current password. Because Auto Login is enabled, you
may not notice if someone changed the password.
1. Click the Start button at the bottom left of your screen.
2. Click Settings from the list to the left.
3. Select Accounts.
4. Select Sign-in options from the menu.
5. Click on Change under Change your account password.
21
Advertisement
Table of Contents
