Table of Contents
Advertisement
To check the status of, or make changes to, the security settings for your
controller, open the Windows Security Center (Start > Control Panel >
Security Center).
The default system setting is Windows Automatic Updates is turned off. You may
want to manually update Windows OS by accessing Internet Explorer and from
the Tools menu, select Windows Update.
User data backup
All user data should be regularly backed up to an external memory device. This
can be done across a network or to a USB device. Your IT department may already
have a backup strategy which is suitable for the system and data. Also, user data
back up should be done just prior to sending the controller back to Keysight for
service.
System Backup and Recovery
Microsoft Windows Embedded Standard 7 (WES7) 32-bit or 64-bit Operating
System is the only operating system installed on your M9037A. There is a small
system partition for the Keysight Recovery System on the SSD. During the boot
process, you are given the choice to boot to Windows 7 normally or boot from the
recovery partition. Refer to the M9037A User Guide for detailed information.
17
Downloading and installing Windows Updates can be network and
CPU intensive (impacting system performance) and some Windows
Updates automatically reboot the controller. Therefore, Windows
updates should be performed when the system is not in normal
use.
There is no antivirus or spyware software included with your
controller. Antivirus application software is the customer's
responsibility. Having antivirus software installed my have a slight
impact on system performance if your system uses intensive
network data transfer.
Some third-party disk backup utilities may destroy the Keysight
backup partition. If this happens, the Keysight Recovery System
will not work.
Keysight M9037A PXIe Embedded Controller Startup Guide
Step 3: Install the M9037A Embedded Controller
Advertisement
Table of Contents
