Front Panel Led Indicators - Keysight Technologies M9038A Startup Manual

M9038A at a Glance

Front Panel LED Indicators

The following table lists the LEDs on the front panel and a brief description of
their use and what they indicate.
Gigabit Ethernet (GbE) LEDs
Both LEDs off indicate that network link is not established or system is powered
off.
LAN Rst Button
The LAN Rst button is reserved for Keysight use only. Depressing the LAN Rst
button has no effect.
Keysight M9038A PXIe Embedded Controller Startup Guide
LED Indicator Color
Pwr Green
SSD Amber
LAN N/A
Usr N/A
Speed and Link
10Mbps: off
Green
100Mbps:
Amber
1Gbps:
Speed and Link
100Mbps: off
Green
1Gbps:
10Gbps: Amber
Description
If the LED is on, the power supply to the controller is good
and the system should boot.
When the Solid State Drive (SSD) is active, the LED will
flash.
These two LEDs are reserved for Keysight use only. The
LEDs should never turn on or flash.
Active:
Blinks when accessing IO
RJ-45
connector
Port #1
Active:
Blinks when accessing IO
RJ-45
connector
Port #2
Amber
Amber
11