Advertisement
Installation Steps, Continued
Alternative Installation
STEP ONE
Remove all cables from the back of the previously
installed 3640 LMU. You will re-attach the
diagnostic cable in a later step, but all other
connected cables can be removed.
STEP TWO
Place the empty 3640 LMU into the bracket on the
Cab-Mate Flex cradle assembly and snap into place
to secure.
LMU
STEP THREE
Connect the 22 pin connector from the Cab-Mate Flex cradle assembly to the LMU.
PedigreeTechnologies.com | Support: (701)-499-0022
Cab-Mate Flex Cradle Assembly
6
Cab-Mate Open 3640
to Cab-Mate Flex
LMU
Advertisement
