Testing / Confirmation Steps
STEP FOUR
Call Pedigree Technologies support to confirm installation before replacing any of the dash
panels you may have removed during cable installation.
You will be prompted for the following information during the set up process
• Device ESN
• Name of Asset (ex. Service Truck 51)
• Year, make, and model
• VIN #
• License plate #
• Mileage
PedigreeTechnologies.com | Support: (701)-499-0022
Install Confirmation: 701-499-0022
STEP THREE
Plug the cradle cable into the 6 pin port on the
Cab-Mate Flex.
Hours
Cab-Mate Open 3640
to Cab-Mate Flex