Table of Contents
Advertisement
3 "VEGA LORAWAN CONFIGURATOR" APPLICATION
3.1 OPERATING MODES
The "Vega LoRaWAN Configurator" application (hereinafter – application, configurator) is intended
for setting up the device via USB.
The configurator has two modes of operation - "Simple" and "Expert". In the "Simple" mode, only
basic settings are available. In the "Expert" mode, the basic settings, advanced settings, and the ability to
check the coverage area of the signal from the gateways are available. Next, the work of the application is
considered in the "Expert" mode.
ATTENTION!
Full functionality becomes available after password entering. You can see only DevEUI and no
available any settings or other information without the password. The "Send Password" command is placed
in the "Commands" field in the "Vega SHVE/SGVE v.2" tab. A password is provided upon request.
Instructions for providing LoRaWAN keys and passwords for metering devices manufactured by OOO PKF
"BETAR" can be downloaded on the websites iotvega.com and betar.ru in the relevant sections.
3.2 APPLICATION INTERFACE
The "Vega LoRaWAN Configurator" application does not require the special installation. When the
executable file is launched, the window for working with the application appears (fig. 3).
Figure 3 — Application workplace
12
Advertisement
Table of Contents
