Important Regulatory And Installation Requirements - Viessmann VITOLIGNO 300-C Installation And Service Instructions Manual

General Information

Important Regulatory and Installation Requirements

Take note of all symbols and notations intended to draw attention to potential hazards or important
product information. These include "WARNING", "CAUTION", and "IMPORTANT".
Codes
The installation of this unit shall be in accordance with
local codes. In the absence of local codes, use:
CSA B365 (latest edition) Installation Code for Solid-Fuel
Burning Appliances and Equipment, NFPA-211 (latest
edition) Standard for Chimneys, Fireplaces, Vents and
Solid Fuel Burning Appliances.
All electrical wiring is to be done in accordance with the
latest edition of CSA C22.1 Part 1 and/or local codes. In
the U.S. use the National Electrical Code ANSI/NFPA 70
where required by the authority having jurisdiction.
Mechanical room
Ensure the mechanical room complies with the
requirements listed in this manual. See section entitled
Mechanical Room.
Working on the equipment
The installation, adjustment, service, and maintenance
of this boiler must be done by a licensed professional
heating contractor who is qualified and experienced in
the installation, service, and maintenance of hot water
boilers. There are no user serviceable parts on the boiler,
or control.
Ensure main power supply to equipment, the heating
system, and all external controls have been deactivated.
Take precautions to avoid accidental activation of power
during service work.
Technical literature
Literature applicable to all aspects of the Vitoligno 300-C
wood-fired boiler:
- Installation and Service Instructions
- Operating Instructions
- Wiring Diagram
6
Vitoligno 300-C Installation/Service
 Please carefully read this manual prior to attempting
installation. Any warranty is null and void if these
instructions are not followed.
Failure to follow these instructions could result in
property damage, injury or loss of life. Contact
your local building and/or fire officials about installations,
restrictions and inspection requirements.
For information regarding other Viessmann
System Technology componentry, please reference
documentation of the respective product.
We offer frequent installation and service seminars
to familiarize our partners with our products. Please
inquire.
 The completeness and functionality of field supplied
electrical controls and components must be verified
by the heating contractor. These include low-water
cut-offs, flow switches (if used), staging controls,
pumps, motorized valves, air vents, thermostats, etc.
 Save and leave all literature at the installation site and
advise the system operator/ultimate owner where the
literature can be found. Contact Viessmann for
additional copies.
 This product comes with several safety instruction
labels attached.
Do not remove!
Contact Viessmann immediately if replacement labels
are required.