Selecting The Pellet Store Sensor - Viessmann Vitoligno 300-C Installation And Service Instructions For Contractors

Commissioning, inspection, maintenance
Configuring the supply system/charging scheme
Setting "2" for pellet supply via a mole from the pellet
storage room and onward transportation via a vacuum
supply system:
Fig. 23
Setting "4" for pellet supply with suction wands from a
pellet store, with automatic changeover unit and
onward transportation via a vacuum supply system:
Fig. 24

Selecting the pellet store sensor

To specify whether a level sensor is present in the pel-
let store, press the following keys:
1. / for pellet store sensor "Yes/No"
| ~
32
(cont.)
2. to confirm.
d