Table of Contents
Advertisement
IV-3-1-2
These settings are for experienced users only. Please do not change any of the
values on this page unless you are already familiar with these functions.
Changing these settings can adversely affect the performance of your
access point.
Contention
Select "Short" or "Long" – this value is used for contention
windows in WMM (see
Slot
Preamble
Set the wireless radio preamble type. The preamble type in
Type
802.11 based wireless communications defines the length of the
CRC (Cyclic Redundancy Check) block for communication
between the access point and roaming wireless adapters. The
default value is "Short Preamble".
Guard
Set the guard interval. A shorter interval can improve
Interval
performance.
802.11g
Enable/disable 802.11g protection, which increases reliability
Protection
but reduces bandwidth (clients will send Request to Send (RTS)
to access point, and access point will broadcast Clear to Send
(CTS), before a packet is sent from client).
Advanced
WMM).
I V-3-6
47
Advertisement
Table of Contents
