Iv-3-1-3-1. No Authentication - Edimax EW-7479CAP User Manual

SSID Selection
Broadcast SSID
Wireless Client
Isolation
Load Balancing
Authentication
Method
Additional
Authentication

IV-3-1-3-1. No Authentication

Authentication is disabled and no password/key is required to connect to the
access point.
Disabling wireless authentication is not recommended. When
disabled, anybody within range can connect to your device's SSID.
41
Select which SSID to configure security settings
for.
Enable or disable SSID broadcast. When
enabled, the SSID will be visible to clients as an
available Wi-Fi network. When disabled, the
SSID will not be visible as an available Wi-Fi
network to clients – clients must manually
enter the SSID in order to connect. A hidden
(disabled) SSID is typically more secure than a
visible (enabled) SSID.
Enable or disable wireless client isolation.
Wireless client isolation prevents clients
connected to the access point from
communicating with each other and improves
security. Typically, this function is useful for
corporate environments or public hot spots
and can prevent brute force attacks on clients'
usernames and passwords.
Load balancing limits the number of wireless
clients connected to an SSID. Set a load
balancing value (maximum 50).
Select an authentication method from the drop
down menu and refer to the information
below appropriate for your method.
Select an additional authentication method
from the drop down menu and refer to the
information below (IV-3-1-3-6.) appropriate for
your method.