HMS Networks Intesis WMP User Manual page 14

Home Automation (WMP) – Samsung NASA
TM
Intesis
By pressing the Scan button, connected Samsung NASA R1/R2 bus will be scanned for available units. An Error
window will appear if there is a problem in the connection with R1/R2 bus (units not powered, bus not connected, ...).
A progress bar will appear during the scan, which will take up to a few minutes. After the scan is completed, the
detected units will be shown in available units as follows:
Figure 4.5 Intesis MAPS Scan Samsung Units window with scan results
Select with its checkbox units to add (or replace) in installation, according to selection Replace Units / Add Units.
After units to be integrated are selected, click button Apply, and changes will appear in previous Units
Configuration window.
© HMS Industrial Networks S.L.U. - All rights reserved
This information is subject to change without notice
Figure 4.5 Intesis MAPS Scan Samsung Units window
User Manual r1.0 EN
URL https://www.intesis.com
14 / 25