HIKVISION iDS-7204AHQHI-M1 Quick Start Manual page 10

Allocate a camera for panel mode. Refer to 2.1 Smart ATM Resources Allocation for details.
Step 1 Click VCA Config.
Step 2 Select the camera you have allocated for panel mode. The basic device information and
VCA type will be displayed on the right.
Step 3 Configure capture and display.
1) Click Capture and Display.
2) Set Display Information and Capture Settings according to your requirement.
3) Click Save.
Smart ATM Protection System Quick Start Guide
Figure 2-3 Panel Mode
10