Maintaining The Instrument; Periodic Maintenance - AML Oceanographic MVP-X User Manual

Maintaining the Instrument

Periodic Maintenance

Periodic preventative maintenance will prolong the life of the instrument. The following steps are
recommended:
 If the instrument is dirty or oily, allow it to soak in warm, soapy water before cleaning with a
rag or soft brush. When finished, rinse with fresh water to remove any residual soap or dirt.
 Before each use:
o Check for proper installation of all Xchange™ sensors.
o Check for nicks and cuts on the cable.
 After each use:
o Clean and rinse the instrument using fresh water.
o Dry the instrument completely, and store it in a cool, dry place.
 Monthly:
o Lightly lubricate the connector contacts with 3M silicone spray or equivalent. Avoid
the use of grease. It can create internal pressure and push past the connector
seals on the pins.
o Lubricate the end cap retainer rings with silicone grease.
 Yearly:
o Send the instrument or Xchange™ sensors to a service centre for diagnostics and
re-calibration.
User Manual for AML Oceanographic's MVPX
6