Advertisement
Quick Links
Gas Spring Aluminum LCD Monitor Desk
English
Deutsch
Français
Español
Italiano
Thank you for choosing this product!We strive to provide you with the best
quality products and services in the industry. Should you have any issues,
please don't hesitate to contact at
supportus@huanuoav.com (US/CA/DE/UK/FR/IT/ES/AU)
Instruction Manual
Model: HATS3
---------------------- 01-07
---------------------- 08-14
---------------------- 15- 21
---------------------- 22-28
---------------------- 29-35
V3.0
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for HUANUO HATS3
Summary of Contents for HUANUO HATS3
- Page 1 Gas Spring Aluminum LCD Monitor Desk Instruction Manual V3.0 Model: HATS3 English ---------------------- 01-07 Deutsch ---------------------- 08-14 Français ---------------------- 15- 21 Español ---------------------- 22-28 Italiano ---------------------- 29-35 Thank you for choosing this product!We strive to provide you with the best quality products and services in the industry.
-
Page 2: Weight Restrictions
• Please read through these instructions completely before attempting installation. If you do not understand the instructions or have any concerns or questions, please contact customer service at supportus@huanuoav.com. • Check package contents against Supplied Parts and Hardware List to assure that all components were received undamaged. - Page 3 SUPPLIED PARTS AND HARDWARE Bolt Bolt Bolt Bolt Bolt Bolt Decorative Cap O (x2) P (x1) Note: The set screws [N] are spare screws which Set Screw (Spare) can be used if the preassembled set screws on the arms [W] and compression arms [U] are missing. TOOLS REQUIRED NOT INCLUDED...
- Page 4 Step 2-1. Adjust the base according 2-2. Connect the pole to the thickness of desktop [Q] to the base [R] For desktop with thickness within 0.79-3.15 in. (20-80 mm) Recommened Desktop Thickness: 0.79-3.15 in. (20-80 mm) Secure the base assembly to the desktop Tighten the pole to the base using 1/8 in(3mm)
- Page 5 Connect the Detach the base [R] entirely pole [Q] to the desktop foot [b] 13/64 in. (5mm) Keep the rubber pad [e] and 4pcs Install base plate [P] and rubber pad [e] to desktop foot with 4pcs bolts preassembled bolts for next step when detaching the base 5/32 in.
- Page 6 Step 2 When attaching brackets to the flat screen, be careful not to over tighten screws and be sure that screws do not bottom out in the mounting holes. Too Short Too Long Step 3 Secure the Arm Assembly to the Pole Assembly Step 3-1 Slide the locating ring [O], Step 3-2 Slide the two extension arms supporting part [V], locating ring [O] and...
- Page 7 If the monitors are 24in. or smaller Attach the two compression arms [U] to Secure the monitors to the compression arms [U] the two extension arms [W] and tighten them using Allen key [K] 1/8 in. (3mm) Insert the screws through the washers and then put on the decorative covers.
-
Page 8: Gas Spring Adjustment
Step 4 Gas Spring Adjustment 13/64 in. (5mm) To ensure the swivel function, please don’t over-fasten the bolt 1/8 in. (3mm) Step 5 Route the Cables Attach the cable clips [F] to the pole Secure the line hooks [X] to the compression arms [U] , then Store the Allen keys route the cables into line hooks...
Need help?
Do you have a question about the HATS3 and is the answer not in the manual?
Questions and answers