Page 1
Instruction Manual V1.0 Model:HNCM15 Thank you for choosing this HUANUO product! At HUANUO we strive to provide you with the best quality products and services in the industry. Please share your experience of our product with others at www.huanuoav.com/reviews if you are satisfied.
Page 2
UNPACKING INSTRUCTIONS AND IMPORTANT SAFETY INFORMATION •Carefully open the carton, remove contents and lay out on cardboard or other protective surface to avoid damage. •Check package contents against the Supplied Parts and Hardware List to assure that all components were received undamaged. Do not use damaged or defective parts. •Not all parts and hardware included will be used.
Page 3
STEP 1A For C Clamp Mounting 1A-1 Connect Part [02] to the Pole [04] 1A-3 1A-2 Conncet Part [03] to Part [02] 1A-3 Secure Mount to Desktop 1A-1 1A-2 Desk Thickness Desk Thickness Desk Thickness...
Page 4
For Grommet Mounting STEP 1B Table top thickness:0-8cm(0-3.15 in.) 1B-1 1B-2 1B-3 1B-4 Install Monitor Connector [01] to the Pole [04] STEP 2...
Page 5
Attach the Monitor Plates [05] to the Monitors STEP 3 FLAT BACK MONITOR (UNIVERSAL MONITOR PLATE) CURVED BACK MONITOR (UNIVERSAL MONITOR PLATE) Secure Monitor to the Stand STEP 4...
Page 6
Fix Tilt Angle of the Monitor STEP 5 Tighten Loosen STEP 6 Manage Cables Cable tie...
Page 7
Features Rotate Swivel 360° 180° Tilt Vertically Adjustable...
Page 8
Thank you again for choosing this Huanuo product! All of us at HUANUO do appreciate your product purchase. We hope that you are as happy with your product as we designing and manufacturing it for you. We strive to provide you with the best quality products and services in the industry.
Need help?
Do you have a question about the HNCM15 and is the answer not in the manual?
Questions and answers