Table of Contents
Advertisement
5-6-1
Name and function of each area
Control area
„
„
Sets display contents specification and automatic refresh on/off.
Ref. No.
Displays the refrigerant circuit address
Date, Time
Sets the date and time of the data you want to display.
Confirms the date and time set above and updates the screen to the latest
OK
status.
Selects the date and time of the data you want to display by moving the probe
2(-hour gauge
or gauge of 2(-hour gauge.
Displays the data that was acquired one before or after the currently displayed
,
data.
Diagram
Switch to the Detail Diagram screen. (Refer to "par. (-( Detail Diagram")
Status List
Switch to the Detail Status List screen. (Refer to "par. (-( Detail Status List")
Check List
Switch to the Detail Check List screen.
Judges each check item by using the sensor instantaneous value acquired at
Point Data
the specified time.
Ave. Data
Calculates the average of sensor value acquired for a certain period of time be-
(previous)
fore the specified time and judges each check item by using the average value.
Ave. Data
Calculates the average of sensor value acquired for a certain period of time af-
(following)
ter the specified time and judges each check item by using the average value.
Period
Selects the period to calculate the average value of sensor value.
CSV
Saves the specified data to a CSV file.
Outdoor unit check list area / Indoor unit check list area
„
„
The sensor value calculated in the condition set at Control area is displayed for each outdoor
/ indoor unit. The judgment results are also displayed. If the calculated sensor value is devi-
ated from the normal value, the background of the data cell becomes red.
For each sensor information, refer to the "par. (-13-3 VRF Sensor Mark List".
Copyright© 2009-2017 Fujitsu General Limited. All rights reserved.
(Blue): Updates the screen to the latest data automatically.
(Gray): Does not update the screen automatically.
87
Advertisement
Table of Contents
