Fujitsu AIRSTAGE UTY-ASGXZ1 Operating Manual page 74

Note *1 The display format differs depending on the data acquisition application set-
ting. (Refer to "par. (-( Environment Setting".)
*2 Only when preset. (Refer to "par. 3-2-4 Name Master Database file selection
screen")
Graph button
The Graph corresponding to the clicked button is displayed.
For the operation method of Graph, refer to "Outdoor unit graph area" below.
Temp.1
Displays the ( temperature graphes at the graph area.
Temp.2
For the kinds of temperature displayed in each graph, refer to " Schematic/
Temp.3
Graph display item" .
Temp.(
Pressure Displays a pressure graph at the graph area.
EEV Displays an electrical expansion valve opening pulse graph at the graph area.
Displays the operating status of the compressor at the graph area. For an in-
CMP
verter compressor, the operation frequency is also displayed.
CMP(V/A) Displays the inverter voltage value and current value of compressor.
FAN Displays the operation status of fan at the graph area.
SV1
Displays the operation status of solenoid valve at the graph area.
SV2
(WV Displays the operation status of (-way valve at the graph area.
Special Displays the special operation status at the graph area.
72
Copyright© 2009-2017 Fujitsu General Limited. All rights reserved.