Table of Contents
Advertisement
Time field
Displays the time that has elapsed after the address check is started by clicking
Unit list
Displays the address acquired by starting address check (refrigerant No. – unit No) (*1).
The row displays the acquired order No., unit type, and address starting from the left.
By pressing header, sorting in ascending order and descending order by pressed head-
er is performed. (Default is display in acquired order.)
Note
*1 • When negative numbers are displayed at the address (Example: -1--1)
Negative numbers may be displayed when the set value of the address is not
recognized normally.
Recheck the address setting (rotary switch, etc.)
• When there is an outdoor unit that is not displayed
When there is a signal amplifier that uses the filter mode between service
tool and outdoor unit, outdoor unit is not displayed because the outdoor unit
data cannot be acquired.
Example)
Service Tool
Service Tool
Signal Amplifer
2(
Signal Amplifer
(with filter)
Signal Amplifer
(without filter)
Service Tool
(with filter)
Outdoor unit
Indoor unit
Outdoor unit
Outdoor unit
Copyright© 2009-2017 Fujitsu General Limited. All rights reserved.
.
Indoor unit
Indoor unit
Advertisement
Table of Contents
