Introduction - Fujitsu D2671 Technical Manual

1

Introduction

This technical manual describes the system board D2671, which is equipped
with one or two Intel® processors.
Further information you will find in the BIOS description.
For additional driver information, refer to the Readme files located on the server
hard disk and on the supplied CDs or DVDs.
Notational conventions
The meanings of the symbols and fonts used in this manual are as follows:
italics
fixed font
semi-bold fixed font
[Key symbol]
"Quotation marks"
Ê
V
CAUTION!
I
Table 1: Notational conventions
D2671 (RX200 S4)
indicates commands, menu options or software
programs.
indicate system output on the monitor.
indicates values to be entered through the keyboard.
indicates keys according to their representation on the
keyboard.
If capital letters are to be entered explicitly, then the
Shift key is shown, e.g. [SHIFT] - [A] for A.
If two keys need to be pressed at the same time, then
this is shown by placing a hyphen between the two key
symbols.
Indicates names of chapters and terms that are being
emphasized.
Describes an operation that must be performed.
Pay particular attention to texts marked with this
symbol. Failure to observe these warnings may
endanger your life, destroy the system or lead to the
loss of data.
Indicates additional information, notes and tips
Technical Manual 5