Advertisement
MODEL: WHE7074SA Diagnostic Manual
Displayed
Function test Actions Availible
code
68
Icemaker
Evaporator
Defrost
Sensor
64
Humidity
Sensor
At the end of all the Function Tests, one section is dedicated to the visualization of the software
version of all the electronic boards that are present in the appliance.
When the last item of Test Loads is visualized, pressing again the (Refrigerator) + button to
progress, it will start automatically to display "--" on the 2 displays and after this it will start the
sequence described below.
Between 2 items (i.e Software Parameters and Main Board Firmware Version) it will be displayed
again a "--" character, used as separator.
a-
Software
Parameters
b-
Main Board
Firmware
Version
(erf2600)
c-
Front UI
Firmware
Version
ARESI1004 Issue 1
Copyright 2018 ELECTROLUX HOME PRODUCTS PTY LTD Technical Services
Activates
Automatically
Activates
Automatically
Runs Automatically,
scrolling all the digits
of the string.
Runs Automatically,
scrolling all the digits
of the string.
Runs Automatically,
scrolling all the digits
of the string.
14
Behaver Expected
a. On Refrigerator Display it shows
temperature sensed by IceMaker
Evaporator Defrost Sensor.
b. It is displayed in °C or ° F according to
UI selection of the temperature
representation.
c. "OP" if open-circuit; "SH" if short-circuit.
a. On the Display it shows relative
Humidity sensed by H&T sensor in %.
b.
"OP" if open-circuit; "SH" if short-circuit.
a. Displays digits sequence related to the
set of parameters that is flashed inside
erf2600 powerboard;
b. It is built of 8 digits. The same digit is
displayed simultaneously on the 2
displays (Freezer and Refrigerator).
c. For Example: " 0049953C "
d. Press (refrigerator) + if you want to skip
this visualization and pass to the next
record.
a. Displays digits sequence related to the
ID_string or firmware version of erf2600
power-board
b. It is built of 8 digits. The same digit is
displayed simultaneously on the 2
displays (Freezer and Refrigerator).
c. For Example: " JHB10G00 "
d. Press (refrigerator) + if you want to skip
this visualization and pass to the next
record.
a. Displays digits sequence related to the
ID_string or firmware version of Cobalt
User Interface (main UI)
b. It is built of 8 digits. The same digit is
displayed simultaneously on the 2
displays (Freezer and Refrigerator).
Advertisement
