Advertisement
MODEL: WHE7074SA Diagnostic Manual
Displayed
Step "77" is skipped
in this model
ARESI1004 Issue 1
Function test Actions Availible
code
77
VCZ Damper
Press (CUBE) to
change the status of
the load
36
Ice Chute
Press (CUBE) to
Door/ Ice
change the status of
Flapper
the load and moves
Motor
the flapper motor.
50
Icemaker
Press (CUBE) to
Twist Tray
change the status of
Harvest Test
the load and start the
rotation.
78
Ice Maker
Press (CUBE) to
Tray Bail
change the status of
Arm/ Ice
the load
Level Bucket
Copyright 2018 ELECTROLUX HOME PRODUCTS PTY LTD Technical Services
Behaver Expected
The third state is when pump moves in
forward direction displaying "Fw".
c. Press (CUBE) button to change the
status
a. It is automatically turned on the
Freezer Evaporator Fan at maximum
speed.
b. When VCZ Damper is open it shows
"OP", when close it shows "CL".
c. Then check for air flow when damper is
fully open "OP"; and no air leaks when
fully closed "CL".
d. During the movement of damper, it
blinks a "1".
e. If the Freezer evaporator fan presents
some errors during its movement, it is
alternatively displayed the error status of
the fan (LC, nS, nP) and the status of
the damper (OP, CL).
f.
Press (CUBE) button to change the
status and open/close the damper.
a. When the flapper motor is closed, it
shows "CL".
b. When the ice chute door is opened, it
shows "OP".
c. During the movement of the flapper
motor, it blinks a "1".
d. The tentatives of opening/closing the ice
chute door are performed recursively for
3 consecutive times and in case of
failure it shows "Er".
e. Press (CUBE) button to change the
status.
a. Remove the Ice Bucket in order to
see clearly the rotation of the ice tray .
b. On Refrigerator Display it shows "Go"
when the tray find the home position
(Horizontal position).
c. During the rotation of the ice tray, it
blinks on the display "1".
d. In case of failure at the end of the
twisting action it shows "Er".
e. Press (CUBE) button to change the
status and start the rotation.
a. Remove the Ice Bucket in order to
see clearly the status of the ice tray
bail arm. .
b. Allow bail arm to drop freely. It shows
"Em" (empty) when tray returns to
"home" position.
Continue......... next page
11
Advertisement
