Electrolux WHE7074SA Diagnostic Manual page 7

MODEL: WHE7074SA Diagnostic Manual
Displayed
code
Step "74" is skipped
in this model
ARESI1004 Issue 1
Function test Actions Availible
Ice Maker
72
Press (CUBE) to
Defrost
change the status of
Heater
the load
VCZ Balance
74
Press (CUBE) to
Heater
change the status of
the load
79 Fill Tube
Press (CUBE) to
Heater
change the status of
the load
10 Auger Motor
Press (CUBE) to
change the status of
the load
13 Fresh Food
Press (CUBE) to
Light
change the status of
the load
14 Light
Press (CUBE) to
change the status of
the load
15
Freezer
Press (CUBE) to
Evaporator
change the status of
Fan
the load
Copyright 2018 ELECTROLUX HOME PRODUCTS PTY LTD Technical Services
Behaver Expected
a. Heater on when "on", off when "oF".
b. IceMaker Evaporator Defrost Sensor
temperature is flashed on refrigerator
display.
c. Watch for temperature increase with the
heater on.
d. It may take a few minutes for the
evaporator to heat up. Maximum 5
minutes ON or 45°C IM Evap Defrost
Sensor threshold.
e. Press (CUBE) button to change the
status
a. Heater on when "on", off when "oF".
b. Maximum 5 minutes ON continuous.
c. Press (CUBE) button to change the
status.
a. Heater on when "on", off when "oF".
b. Maximum 5 minutes ON continuous.
c. Press (CUBE) button to change the
status.
a. Fresh Food door must be closed.
b. Motor running when "on"; motor stopped
when "oF"
c. Press (CUBE) button to change the
status.
a. Fresh Food lights on when "on", off
when "oF"
b. Press (CUBE) button to change the
status.
a. VCZ light on when "on", off when "oF"
b. Press (CUBE) button to change the
status.
a. It is possible to run the Freezer Evap Fan
at 3 possible speeds.
b. Fan runs on maximum speed when "on";
medium speed when "
the "oF" is displayed
c. Press (CUBE) button to change the
status.
8
n
L "; stopped when