Advertisement
MODEL: WHE7074SA Diagnostic Manual
Behavior in Diagnostic Mode:
1. To enter diagnostic mode, press and hold + (freezer) and – (freezer) for 10 seconds.
2. On detection of 10-sec-holding of above buttons, all the Display LEDs on the External UI
Turn on & a beep tone will be heard
3. Press (Refrigerator) + button to progress through the different loads.
4. Press (Refrigerator) – button to come back to previous function.
5. Press (CUBE) button to change the status of the load.
6. Each load is associated with a number indicated in the Freezer Display and the Status is
shown in the Refrigerator Display. (See Service mode table below for details.)
Note: When there is the request to visualize some extra information more than the status of
the load (ex: freezer defrost heater and freezer defrost evaporator temperature), the
visualization on the displays is performed in this way:
Freezer Display: N° item
•
whilst testing the heater and sensor the value will be displayed in the fridge section
•
and alternate between value and status
Freezer Display
8. To EXIT from diagnostic mode, press and hold + (freezer) and – (freezer) buttons for 10
seconds. The appliance will restart in normal mode.
stages in order during the Diagnostic Mode
N°
Function Test
Test
Initial diagnostic start up -
-
First Push "+"
-
ARESI1004 Issue 1
Copyright 2018 ELECTROLUX HOME PRODUCTS PTY LTD Technical Services
ns
Actio
Availible
-
6
:
Behavior Expected
a. Turns On all the LED's of the Display
a. Turns Off all the LED's of the Display
Refrigerator Display
Advertisement
