Prefix/Suffix (Synapse) - Symbol LT 1804 Product Reference Manual

LT 1804 Product Reference Guide: Parameter Menus
Prefix/Suffix (Synapse)
To append a prefix or suffix to scan data in a Synapse configuration:
1. Scan the PREFIX or SUFFIX bar code below.
2. Scan four numeric bar codes from the following pages representing the
desired terminal's key code. See
ASCII Conversion Table.
If you make an error or wish to change your selection, scan DATA
FORMAT CANCEL.
Table 4-5 on page 4-25
PREFIX
SUFFIX
DATA FORMAT CANCEL
5-55
for the Synapse