Table of Contents
Advertisement
•
The lane is too narrow.
•
Something is obscuring the camera or
it is unable to detect the lane markings
due to environment, traffic or vehicle
conditions.
•
Entering or exiting a tight curve when
driving at high speeds.
The lane keeping system may not correct
lane positioning in any of the following
conditions:
•
High winds.
•
Uneven road surfaces.
•
Heavy or uneven loads.
•
Incorrect tire pressure.
SWITCHING THE LANE
KEEPING SYSTEM ON AND
OFF - VEHICLES WITH: 4.2
INCH SCREEN
To activate the lane keeping
system, press the button on the
steering wheel.
E173233
To deactivate the lane keeping system,
press the button again.
Note: When switching the system on or off
a message appears in the information and
entertainment display to show the status.
Note: The system stores the on or off
setting until manually changed, unless it
detects a MyKey™. If the system detects a
MyKey™, it defaults to the last setting for
that MyKey™.
Note: If the system detects a MyKey™,
pressing the button does not affect the on
or off status of the system. You can only
change the mode and intensity settings.
System Settings
To switch the system on or off, use the
instrument cluster display:
2022 Super Duty (TFE) Canada/United States of America, enUSA, Edition date: 202103, First-Printing
Lane Keeping System
(If Equipped)
1.
Select Driver Assist.
2. Select Lane-Keeping System.
3. Switch the feature on or off.
The system remembers the last selection.
You do not need to readjust the setting
each time you turn on your vehicle.
Sensitivity: This setting allows you to
select where in the lane the system
provides a warning. Increasing the
sensitivity setting moves the warning zones
in closer to your vehicle.
E165517
A
Normal.
B
Increased.
Note: The alert diagram illustrates general
zone coverage. It does not provide exact
zone parameters.
Intensity: This setting affects the intensity
of the steering wheel vibration. Increasing
the intensity causes a higher rate of
feedback.
•
High.
•
Normal.
•
Low.
287
Advertisement
Table of Contents
Troubleshooting
