Switching Stability Control On And Off - Ford F-250 Super Duty 2022 Owner's Manual

Side Wind Stabilization
Side wind stabilization is an advanced
feature that works by carefully applying
the brakes on one side of the vehicle to
reduce the effect of a side wind gust on
the vehicle's path.
Torque Vectoring by Brakes
Torque vectoring control applies brake
torque on the inner driven wheel in a curve
for better traction to avoid an understeer,
or oversteer situation. Unlike electronic
stability control, enhanced torque
vectoring control does not slow the
vehicle. It helps control excessive wheel
slip and gives the vehicle improved
cornering agility.
Traction Control
Traction control enhances your vehicle's
ability to maintain traction of the wheels
by detecting and controlling wheel spin.
See What Is Traction Control (page 247).
2022 Super Duty (TFE) Canada/United States of America, enUSA, Edition date: 202103, First-Printing
Stability Control
E72903
SWITCHING STABILITY
CONTROL ON AND OFF
The system turns on each time you switch
the ignition on.
You can switch the electronic stability
control system off by pressing and holding
the ESC off button for over 5 seconds, or
you can press the button again to switch
the system on.
Shifting the transmission into reverse (R)
will disable the system.
You can switch the traction control system
off or on independently. See Switching
Traction Control On and Off (page 247).
250
A Vehicle without stability control
skidding off its intended route.
B Vehicle with stability control
maintaining control on a slippery
surface.