Connection Of Additional Equipment - Aastra M325 Manual

On Hold
Press to place a call on hold. The call can be resumed by lifting the handset on
h
any parallel connected telephone on the same line.
Recall
Press the recall button R followed by the extension number to transfer calls when
connected to a PBX (TBR only).
Access to additional network services can be gained by using the recall button R,
and keys. Contact your network operator for more information.
#
Ringer
The ringer volume, melody and tone can be selected using the switches located on the
underside of the telephone (unscrew the cover):
e
n
Memory
This telephone has 10 One-Touch memories.
Storing One-Touch Memories
/
1. Ensure the
P
set to .
P
2. Lift the handset or press
3. Enter the telephone number to be stored (up to 32 digits). Press
4. Select a memory position by pressing the corresponding memory button.
5. Replace the handset.
If you need to insert a pause in the telephone number press
If you need to change a number, store the new number in the same location as the old one.
Dialling using One-Touch Memories
1. Lift the handset or press
2. Press the required One-Touch memory button.
Connection of additional equipment
On the side of the telephone there is a socket marked 8, this will allow additional
telephone equipment i.e. cordless, modems, etc to be connected allowing access to the
telephone line.
You can reconfigure the phone ports using the switch (1:2) on the underside of the telephone (behind the
attached cover), so that the telephone port (1) and the outer port (2) are connected in parallel.
Ring volume
Ring melody
Ringer tone
/PROG. switch located on the underside of the telephone is
N
, dial tone will be heard (ignore any tone). Press
, dial tone will be heard.
English
.
r
*
.
P
.
P