Table Of Zones; Rapid Resume Logic - Clifford 330X1 Owner's Manual

Table of zones

The zone number is the number of LED flashes used by the system to
identify that input. The standard input assignments are listed below.
ZONE
(Number
LED Flashes)
1
2
3
4
5
6
The LED will not report if the Warn Away response is triggered.

Rapid resume logic

This system will store its current state to non-volatile memory. If power
is lost and then reconnected the system will recall the stored state from
memory. This means if the unit is in Valet
connected for any reason, such as servicing the car, when the battery
is reconnected the unit will still be in Valet
states of the system including arm, disarm, and Valet
© 2008 Directed Electronics - all rights reserved
DESCRIPTION
Boot /bonnet opening
N/A
Door switch trigger
Ultrasonic sensor
Ignition input
Extra switch input (if installed)
® Mode and the battery is dis-
Mode. This applies to all
®
Mode.
®
11