Safety Warnings - Makita DTR181 Instruction Manual

Combination of 3 rebars
#3 (10 mm)
#4 (13 mm)
#5 (16 mm)
#6 (19 mm)
#7 (22 mm)
#8 (25 mm)
* The combination is not designed for high tying strength.
Combination of 4 rebars
#3 x #3 (10 mm x 10 mm)
#4 x #4 (13 mm x 13 mm)
#5 x #5 (16 mm x 16 mm)
NOTICE:
If there is a gap between rebars or if the tool is used at an incorrect orientation, the rebars may not be
able to be tied.
Symbols
The followings show the symbols which may be used
for the equipment. Be sure that you understand their
meaning before use.
Read instruction manual.
Wear safety glasses.
Do not expose to rain.
Keep hands away from the wire reel or wire
when operating the tool.
Keep hands away from the tool tip.
Push the release lever before loading
the tie wire. Having installed the tie wire,
release the lock lever.
#3 x #3 (10 mm x 10 mm)
*
*
#3 x #3 (10 mm x 10 mm)
Ni-MH
Li-ion
Intended use
The tool is intended for tying rebars.

SAFETY WARNINGS

General power tool safety warnings
WARNING:
tions, illustrations and specifications provided
with this power tool. Failure to follow all instructions
listed below may result in electric shock, fire and/or
serious injury.
13 ENGLISH
#4 x #4 (13 mm x 13 mm)
#4 x #4 (13 mm x 13 mm)
Only for EU countries
Due to the presence of hazardous com-
ponents in the equipment, waste electrical
and electronic equipment, accumulators
and batteries may have a negative impact
on the environment and human health.
Do not dispose of electrical and electronic
appliances or batteries with household
waste!
In accordance with the European Directive
on waste electrical and electronic equip-
ment and on accumulators and batteries
and waste accumulators and batteries,
as well as their adaptation to national law,
waste electrical equipment, batteries and
accumulators should be stored separately
and delivered to a separate collection point
for municipal waste, operating in accor-
dance with the regulations on environmen-
tal protection.
This is indicated by the symbol of the
crossed-out wheeled bin placed on the
equipment.
Read all safety warnings, instruc-
#5 x #5 (16 mm x 16 mm)