Eaton NRX Series Instruction Leaflet page 8

Instruction Leaflet IL019238EN
Effective July 2019
8. Install the PXR 25 wire harness. Match the wire number to the
corresponding spot on the secondary connection. Make sure the
wires are installed in the correct orientation. Even numbers will
be on the top row, and odd numbers will be on the bottom row.
8 EATON www.eaton.com
Series NRX breaker PXR trip unit
N ote: If working with the RF breaker, push in the trip unit interlock on the
side of the trip unit slot prior to removing the trip unit. See picture below.
N ote: If working with the NF breaker, engage the wire form interlock prior to
removing the trip unit. See picture below.
field installation instructions