Cautions On Handling The Printer; Battery Safety Precautions - Epson Mobilink TM-P80II Technical Reference Manual

Cautions on Handling the Printer

Do not use, charge, leave, or store the product at temperatures in excess of 60°C (140°F). Doing so
may cause the product to leak, generate heat or smoke, rupture, or burst into flame.
DANGER
❏ Immediately remove the batteries from the printer or disconnect cables when a fault or other
problem occurs, and contact qualified service personnel. Continued use may lead to fire or
electric shock.
WARNING
• If the product emits smoke, a strange odor, or unusual noise.
• If water or other liquid spills into the product.
• If the product is too hot to touch or the case is deformed.
❏ Note the following points to avoid accidents such as fire, electric shock, or burn.
• Do not use this product where flammable fumes from gasoline, benzine, thinner, or other
flammable liquids may be in the air.
• Do not use aerosol sprayers containing flammable gas inside or around the product.
• Do not cover the product with cloth, or place the product in locations subject to high levels of
humidity or dust.
• Do not allow foreign objects or flammable objects to fall into the equipment.
• Do not touch the inside of the product except where mentioned in the manual.
• Be sure to use the specified batteries.
• Use a power supply that complies with the USB standard.
• Do not connect cables in ways other than those mentioned in the manual.
• Never disassemble or modify the product.
• In airplanes, follow the instructions from the airline. Turn off wireless devices during takeoff
and landing according to the in-flight announcement.
• Do not use the product near medical equipment or in medical institutions. Radio waves may
affect artificial cardiac pacemakers or other medical electrical equipment.
• Do not use the product near automatic control equipment such as automatic doors and fire
alarms. Doing so may cause malfunction due to radio waves, resulting in an accident.
❏ Note the following points to avoid injury or malfunction.
• Do not place heavy objects on top of the product. Never stand or lean on the product.
• Do not press your hands or fingers against the cutter when removing printed paper or load-
CAUTION
ing/replacing roll paper.
• Never attempt to repair the product yourself.
❏ To ensure safety, remove the batteries from the printer before leaving it unused for an extended
period.

Battery Safety Precautions

❏ Risk of fire and burns. Do not expose the battery to fire or heat it. This may cause fire, explosion,
leakage, overheating or damage.
❏ Do not use or charge this product in high temperature places (60°C {140°F} or higher).
DANGER
Furthermore, do not leave or store this product in places that are 60°C {140°F} or higher. Doing so
could lead to heat, smoke, ruptures, fire, or leaks.
❏ Do not directly solder the battery, and do not disassemble or modify it. This may cause fire,
explosion, leakage, overheating or damage.
❏ Do not connect the terminals together. This may cause fire, explosion, leakage, overheating or
damage.
4