Table of Contents
Advertisement
NEO-D9S and ZED-F9 configuration
monitoring, and control. The USB interface is provided for host communication purposes and can be
used for monitoring or logfiles collection.
Figure 3 shows the series of actions to be done:
Figure 3: ZED-F9 and NEO-D9S configuration sequence diagram
Configuration strings are provided in the following sections of the document for each configuration
item. If you are using u-center, the strings can be sent via a custom message:
Figure 4: Send Custom message with u-center
For more details, see the u-center user guide [3].
The easiest way to test how to configure the NEO-D9S and ZED-F9 receivers is to make use of the
C099-F9P and C101-D9S application boards. See the related user guides [6] and [7], and in particular
Chapter 4 of the C101-D9S User Guide.
UBX- 22008160 - R02
Introduction
Page 5 of 17
C1-Public
Advertisement
Table of Contents
