Panasonic MK-F800 Operating Instructions Manual page 7

PART NAMES
Blender, Dry Mill & Accessories
①
Working
capacity: 1 L
②
③
1. Blender Lid
2. Blender Jug
3. Blender Cutting Blade
4. Mill Container
5. Mill Cutting Blade
Control Panel
Mode Selection
- Auto Menu -
Mince Mode
Chop Mode
Frozen Mode
Paste Mode
Drainer Mode
- Manual Menu -
Continuous Mode
Intermittent Mode
Note:
• The program will time-out and reset itself after 10 seconds if no further action is done after a function is
selected.
• Turning the Rotary Dial clockwise will increase the number of lighted bars and vice versa.
• The default speed for the Continuous and Intermittent modes are at maximum, (level 10).
• The program will time-out and reset itself after 20 seconds if the program is paused during processing and no
further action is done.
・ Continuous Mode will stop automatically approximately 19 minutes and Intermittent Mode will stop
automatically approximately 7 minutes after processing is started.
④
⑦
⑤
⑥
6. Mill Container Base
7. Storage Case Unit
8. Brush
Speed Indication Stop/Start (OFF/ON) Switch
Driving Time Indication
⑧
Mode Indication L.E.D.
Speed & Driving Time
Indication L.E.D.
PULSE Switch
Rotary Dial
7