Panasonic MK-F800 Operating Instructions Manual page 25

DRY MILL
Operating with Manual Menu
1
1
2
After completing the assembly steps, plug-in the plug
into the socket and turn on the Power Switch. The
Mode Indication L.E.D.s will light up and blink.
3 3
During the driving operation, the OFF/ON Indication
L.E.D. will remain lit. Push the OFF/ON Switch to stop
the driving operation.
Note:
• While removing the ingredients, be careful of the Cutting Blade.
• Do not operate exceeding the rated operation duration (1 min ON, 2 min OFF).
2
Select the Continuous mode and adjust the speed with
the Rotary Dial. The more bars are lighted, the higher the
speed. Push the OFF/ON Switch to start the operation.
4
2
1
After the processing is completed, switch off the Power
Switch and unplug from the socket. Remove the Dry Mill
Unit from the Motor Housing and proceed to remove the
ingredients.
3
4
25