Step 9: Configure Stratagy Admin Software - Toshiba Stratagy DK Manual

3. Press any key to continue and the Stratagy Admin program is installed on drive C: in
subdirectory ADMIN3.
Configure Stratagy Admin Software
Step 9:
Settings for the communication port in Stratagy Admin must match the corresponding
parameters set in the Stratagy System Configuration file on the Stratagy DK.
For example, if using COM 1 on the portable/desktop computer and serial Port 2 on the
Stratagy DK, the Stratagy Admin Serial Port definitions for COMl must be identical to the
serial port definitions (i.e., set seriafgort) in the Stratagy System Configuration file on the
Stratagy DK.
Note
The menu screens detailed in this section are only available with Admin version
From the C : \ADMIN3 DOS prompt, type admin and press Enter.
1.
The Stratagy Admin Main screen is displayed:
Note Press
2. Press 2 or highlight the Configure Admin option and press
The following screen appears:
Note Press
entries.
3. See Table 4 for a description of each of the fields. To save your changes, you must press
Enter or the arrow down (J) key from the last field (i.e., Modem Init String). The
12
F2 in the Serial Port and Baud Rate fields to display a pop-up box with valid
returns to the Admin Main screen.
Enter.