SRC H-AFT18-14-01-SL Installation page 4

Step 4:
Slide-in the Top Plate (3), as shown
and orient the mounting holes in-line
with the 4 Projecting screws.
Secure the threads on the screw using
M6 Nut (6), as shown.
Copyright By SRC
Design and Specification are subjected to change
Step 3:
Slide-in the Spacer (4), as shown and
orient the mounting holes in-line with
the 4 Projecting screws.
As shown in the left, is the Final
Mounted condition of the Side Stand
Page 4