Declaration Of Incorporation; Spare Parts; Ordering Spare Parts - Holzstar DB 900 Instruction Manual

Declaration of incorporation

8 Declaration of incorporation
According to Machinery Directive 2006/42 / EC Annex II
1.A
Manufacturer /
distributor: Stürmer Maschinen GmbH
Dr.-Robert-Pfleger-Str. 26
96103 Hallstadt / Bamberg
Hereby declare that the incomplete machine described
below
product group: Holzstar® Woodworking machines
Designation: Copy device
Type: Copy device for DB 900
Copy device for DB 1100
Serial number: ___________________
Year of manufacture: 20____
meets all the basic requirements of the Machinery Direc-
tive 2006/42 / EC, insofar as this is possible within the
scope of delivery. We further declare that the specific
technical documentation has been prepared in accor-
dance with Part B of Annex VII to this Directive.
The incomplete machine may only be commissioned if it
has been determined that the machine or system in
which the incomplete machine is to be installed complies
with the provisions of the Machinery Directive 2006/42 /
EC and the EC Declaration of Conformity pursuant to
Annex II A is issued.
Responsible for
documentation: Kilian Stürmer,
Dr.-Robert-Pfleger-Str. 26,
D-96103 Hallstadt
Hallstadt, 31.10.2013
______________________
Kilian Stürmer
Manager
6
9

Spare Parts

Tips and recommendations
The manufacturer's warranty will become null and
void if non admitted spare parts are being used.
DANGER!
Danger of injury by the use of
wrong spare parts!
Dangers may result for the user and damages as well
as malfunctions may be caused by using wrong or
damaged spare parts.
- Only use original spare parts of the manufacturer or
spare parts admitted by the manufacturer.
- Always contact the manufacturer in case of uncer-
tainties.

9.1 Ordering Spare parts

The spare parts may be purchased with the authorised
dealer or directly with the manufacturer. Please find the
corresponding contact data in Chapter 1.2 Customer
service.
Indicate the following basic information for spare part or-
ders:
- Type of device
- Serial number
- Position number
- Quantity
- Year of manufacture
- Required mode of dispatch (mail, freight, sea, air,
express)
- Address of dispatch
Spare parts orders without details given above can not
be considered. If the shipping method is missing, ship-
ping will be at the discretion of the supplier.
Example
The Gear for the Copy device DB 1100 must be ordered.
The Gear has item number 32 in the spare part drawing.
- Type of device: Copy device DB 1100
- Item number: 5931102
- Position number: 32
The order No. is: 0-5931102-32
- Place the digit 0 in front of the article number.
- Also place the digit 0 in front of the part numbers 1
through 9.
Copy device | Version 3.02