Pre-Operation Inspection And Service - Bush Hog BH200 Series Operator's Manual

Table of Contents

Advertisement

8. PRE-OPERATION INSPECTION AND SERVICE

Before each use, a pre-operation inspection and service of the implement and tractor must be performed.
This includes routine maintenance and scheduled lubrication, inspecting that all safety devices are equipped
and functional, and performing needed repairs. DO NOT operate the unit if the pre-operation inspection
reveals any condition affecting safe operation. Perform repairs and replacement of damaged and missing
parts as soon as noticed. By performing a thorough pre-operation inspection and service, valuable down time
and repair cost can be avoided. OPS-U-0029
Always disconnect the main PTO Driveline from the Tractor before performing service on
the Implement. Never work on the Implement with the tractor PTO driveline connected and
running. Rotating Parts, Blades or Drivelines could turn without warning and cause
immediate entanglement, injury or death.
Periodically inspect all moving parts for wear and replace when
necessary with authorized service parts. Look for loose fasteners, worn
or broken parts, and leaky or loose fittings. Make sure all pins have
cotter pins and washers. Serious injury may occur from not maintaining
this machine in good working order.
WARNING
WARNING
Non-genuine parts can fail catastrophically.
TO AVOID DEATH OR SERIOUS INJURY:
ONLY use genuine Bush Hog replacement parts.
Non-genuine parts can fail
creating hazardous conditions
for operator and bystanders.
Contact local dealer or Bush Hog
about repair parts at:
2501 Griffin Ave.,Selma, Al 36701
Customer Service: 800-363-6096.
Email: contactus@bushhog.com
BH200 Series 08/20
© 2020 Alamo Group Inc.
OPERATION
BE AWARE
BE ALERT
BE ALIVE
To prevent serious injury to yourself and/or bystanders,
be trained in Safe Mowing Practices. Alamo Group
Companies as well as AEM and FEMA provide training
material that is critical for your Safety and the Safety
of others when operating this equipment. Make these Safety
Procedures an important part of every workday. Read and understand
the Operator's Manual.
www.algqr.com/bpm
Do not let untrained individuals operate this equipment. Contact your
Dealer, AEM (www.aem.org), FEMA (314-878-2304,
www.FarmEquip.org), or Alamo Group (www.Alamo-Group.com) for
information on training material or courses that provide training in
Safer Operating Practices for Mowers.
Operation Section 4-18
(S3PT-11)
(SG-21)
IMPORTANT
BE TRAINED
Before Operating this Mower
www.algqr.com/bve
D559

Advertisement

Chapters

Table of Contents
loading

This manual is also suitable for:

Bh215Bh216Bh217Bh215-2Bh216-2Bh217-2

Table of Contents