VAC-2-HEPA............................9 VAC-2D-HEPA ............................10 EV-30H ..............................11 Thank you for purchasing this Goodway HEPA Vacuum Cleaner. As with all Goodway products, you can be assured that the finest quality components and workmanship have gone into this machine. Please take a few minutes to read the following Operating and Maintenance Instructions.
Their HEPA (High Efficiency Particulate Air) filter system retains hazardous dust and particles and is rated 99.97% efficient at 0.3 microns. While the VAC-2-HEPA can be used for both wet and dry pickup, the VAC-2D-HEPA and EV-30H can only be used for dry pickup applications.
Do not remove, substitute, bypass or change in any way the filters used in the Goodway HEPA Vacuums. • Use only Goodway filters – use of other filters will void the warranty and may not provide proper filtration. • Change the paper collection bag when full.
NOTE: For replacement of the liner and filters follow the procedures listed under “DRY PICKUP”. OPERATION – WET PICK-UP – VAC-2-HEPA ONLY TANK/FILTER SETUP NOTE: Always wear gloves and an approved respirator when handling used filters.
Page 7
Reverse the above procedures to replace the brush assembly. Install new brush assemblies when the carbon brush is worn down to 1/2" (13mm). CHANGING THE HEPA FILTER: VAC-2-HEPA and VAC-2D-HEPA NOTE: Always wear gloves and an approved respirator when handling used filters.
Secure the plastic bag marking it “HAZARDOUS MATERIALS” or as appropriate. Install a new collection bag and HEPA filter, ensuring that the gasket makes proper contact all the way around the lip of the tank. Re-install the vacuum head. END OF THE DAY CLEANUP Follow the steps under “REMOVING CONTAMINATED FILTERS AND TANK CLEANING.”...
Need help?
Do you have a question about the VAC-2-HEPA and is the answer not in the manual?
Questions and answers