ITS Telecom EKSELANS CAP 2 User Manual page 9

Controller for access points
Table of Contents

Advertisement

"Device Network " allows you to configure how the AP obtains IP:
DHCP: Gets the DHCP IP automatically from CAP 2.
Static IP: Allows you to manually assign the desired IP to the AP.
The "Wireless Basic" menu allows you to configure the basic options:
Device list: If the AP has only a 2.4 or 5.8 broadcast band, it will correspond to WLAN 1, if on
the contrary the AP has 2.4 and 5.8 the WLAN 1 will correspond to 2.4 GHz and WLAN 2 to
5.8 GHz.
AP configuration: APs allow you to configure up to 4 SSIDs.
Status: Enabled – Enables SSID, Disabled – Disables SSID.
Broadcast SSID: Enabled - Emits SSID, Disabled – Hidden SSID,
SSID: SSID Name.
ITS Partner O.B.S S.L · Av. Cerdanyola 79-81 Local C
08172 Sant Cugat del Vallés · Barcelona (Spain)
Phone: +34935839543 · info@ek.plus · www.ek.plus
USER MANUAL CAP 2
9

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the EKSELANS CAP 2 and is the answer not in the manual?

This manual is also suitable for:

335002

Table of Contents