Policy Routing - ITS Telecom EKSELANS CAP 2 User Manual

Policy Routing

This feature allows you to control and direct traffic through rules and routes to the WAN you
want.
1. Add: Adds a route. Clicking will bring up the following window:
•
Status: Enables or disables the rule.
•
Policy type: Determines the type of font to use for the rule. Define: Source of an IP,
destination of an IP, domain, a specific port, a MAC and an interface.
•
WAN: Determines the WAN where traffic will be redirected.
2. Delete: Deletes the selected route.
3. Apply: Applies routes that have been created.
4. Config: Allows you to edit the selected route.
ITS Partner O.B.S S.L · Av. Cerdanyola 79-81 Local C
08172 Sant Cugat del Vallés · Barcelona (Spain)
Phone: +34935839543 · info@ek.plus · www.ek.plus
USER MANUAL CAP 2
18