Table of Contents
Advertisement
USER MANUAL CAP 2
WAN
WAN Setting
The CAP 2 allows you to change 3 of your LAN ports and enable them as WAN ports. In this way it is
possible to have up to 4 WAN connections, 1 per ISP.
Clicking on the "Config" button on each WAN will open a sale to be able to configure:
CAP 2 allows you to configure the WAN port in different ways; Static IP, DHCP, PPPoE, or disabled. If the
WAN is disabled, the port will function as a LAN port.
It is also possible to limit the throughput of each WAN with the "Band Type", Downstream and Upstream.
Allows you to configure access to the CAP 2 web interface over the WAN.
ITS Partner O.B.S S.L · Av. Cerdanyola 79-81 Local C
17
08172 Sant Cugat del Vallés · Barcelona (Spain)
Phone: +34935839543 · info@ek.plus · www.ek.plus
Advertisement
Table of Contents
Need help?
Do you have a question about the EKSELANS CAP 2 and is the answer not in the manual?