Related Manuals for Enable-IT 860WC PRO
Summary of Contents for Enable-IT 860WC PRO
- Page 1 Enable-IT 860WC PRO Gigabit Coax Ethernet Extender Kit Quickstart Guide Professional Grade Networking All Rights Reserved © 1997 - 2020 Enable-IT™, Inc.
- Page 2 (915m) over 75 Ohm rated RG6 cabling between the 860WC PRO units. You can add an additional 328ft (100m) onto the end of each 860WC PRO LAN output ports for a total distance of 3,656ft (1.1km) from device extension to device extension.
- Page 3 Attach the 56V - 65W PoE Injector to the 860W PRO CO unit. Attach your local Interlink cabling end to the 860WC PRO Injector unit Interlink port – Then do the same for the remote end and plug into the 860WC PRO Extender unit Interlink port. The Interlink side Green Link LED should blink rapidly, indicating is sees the remote partner.
- Page 4 Online Technical Services The Enable-IT Support Portal is available 24/7 to open a ticket or check the status of one. Please use this support website as your first source for help as it contains an on-line knowledge base of articles, documentation, FAQ's and other problem-solving resources.
- Page 5 Remedies for Breach of Warranty. In the event of a breach of the foregoing warranty, Enable-IT will, in its sole discretion and at its cost, and subject to the terms of the following paragraph, repair the non-conforming Product, replace the non-conforming Product with a new or reconditioned Product or refund the purchase price for the Product.
- Page 6 USING THE PRODUCT. 2. LIMITATION OF LIABILITY. IN NO EVENT SHALL ENABLE-IT BE LIABLE TO THE END USER, OR ANY THIRD PARTY, FOR ANY INDIRECT, SPECIAL, PUNITIVE, INCIDENTAL OR CONSEQUENTIAL DAMAGES IN CONNECTION WITH OR ARISING OUT OF THE SALE OR USE OF THE PRODUCT (INCLUDING...
Need help?
Do you have a question about the 860WC PRO and is the answer not in the manual?
Questions and answers