Related Manuals for Enable-IT 860 W PRO
Summary of Contents for Enable-IT 860 W PRO
- Page 1 Enable-IT 860 W PRO Weatherproof Professional Grade Ethernet Extender Kit Quickstart Guide All Rights Reserved © 1997 - 2015 Enable-IT™, Inc.
- Page 2 Ethernet patch cord to connect the Power & Data Out jack on the 360 PoE Injector to the 860 W PRO CO port as labeled. Using the power cord, power up the 360 Injector. The Green Sync LEDs will start flickering slowly and then fast as the units talk to each other.
- Page 3 LED indicators will provide visual operational status of the 860 W PRO Weatherproof units. Mode – Yellow Solid LED Off = CO unit On = CPE unit Sync – Green slow to fast flicker LED on power up – indicates negotiation of a link –...
- Page 4 Attach your local Interlink cabling end to the 860 W PRO Weatherproof CO unit Interlink port – Then do the same for the remote end and plug into the 860 W PRO Weatherproof CPE unit Interlink port. The Sync LED’s will flicker in a sequence talking to each other until they go solid.
- Page 5 Returning Products for Warranty Repair Enable-IT, Inc. warrants to the original purchaser of the Product ("you" or the "End User") that, for the four (4) year period commencing on the date the Product was purchased (the "Warranty Period"), the Product will be substantially free from defects in materials and workmanship under normal use and conditions.
- Page 6 Sales and Customer Care: Toll Free US and Canada 888 309-0910 866 389-8605 Fax Other International +1 702 924-0402 +1 702 800-2711 Fax E Mail sales@enableit.com support@enableit.com RMA Support: http://support.enableit.com All Rights Reserved © 1997 - 2015 Enable-IT™, Inc. Page ! of !
Need help?
Do you have a question about the 860 W PRO and is the answer not in the manual?
Questions and answers