Related Manuals for Enable-IT 860XC PRO
Summary of Contents for Enable-IT 860XC PRO
- Page 1 Enable-IT 860XC PRO Gigabit Coax Ethernet Extender Kit Quickstart Guide Professional Grade Networking All Rights Reserved © 1997 - 2020 Enable-IT™, Inc.
- Page 2 (915m) over 75 Ohm rated RG6 cabling between the 860XC PRO units. You can add an additional 328ft (100m) onto the end of each 860XC PRO LAN output ports for a total distance of 3,656ft (1.1km) from device extension to device extension.
- Page 3 Attach the power adapters to both 860XC PRO units. Attach your local Interlink cabling end to the 860XC PRO CO unit Interlink port – Then do the same for the remote end and plug into the 860XC PRO CPE unit Interlink port. The Interlink side Green Link LED should blink rapidly, indicating is sees the remote partner.
- Page 4 1) Make sure your wiring is straight through end to end coax. 2) Check for a firm connection of the RJ-45 and Coax BNC connections in each 860XC PRO unit, and power is applied to the 860XC PRO CO & CPE units.
- Page 5 Remedies for Breach of Warranty. In the event of a breach of the foregoing warranty, Enable-IT will, in its sole discretion and at its cost, and subject to the terms of the following paragraph, repair the non-conforming Product, replace the non-conforming Product with a new or reconditioned Product or refund the purchase price for the Product.
- Page 6 USING THE PRODUCT. 2. LIMITATION OF LIABILITY. IN NO EVENT SHALL ENABLE-IT BE LIABLE TO THE END USER, OR ANY THIRD PARTY, FOR ANY INDIRECT, SPECIAL, PUNITIVE, INCIDENTAL OR CONSEQUENTIAL DAMAGES IN CONNECTION WITH OR ARISING OUT OF THE SALE OR USE OF THE PRODUCT (INCLUDING...
Need help?
Do you have a question about the 860XC PRO and is the answer not in the manual?
Questions and answers