Furniture of America Egaleo CM5814TV Assembly Instructions Manual

To assemble the Furniture of America Egaleo CM5814TV, follow these general steps. Note that exact steps may vary slightly depending on the version of the product, so always refer to the included instruction manual:

1. Unpack and Organize Parts: Lay out all pieces and hardware. Verify that all parts listed in the manual are included.

2. Prepare Tools: Use basic tools like a screwdriver and hammer if required. Some furniture comes with Allen wrenches or other tools included.

3. Assemble Frame:
- Attach side panels to the bottom panel using bolts or screws as indicated.
- Secure the back panel to the frame (may require nails or cam locks).

4. Install Shelves and Dividers:
- Insert shelf supports and place shelves accordingly.
- If there are center dividers, attach them using provided hardware.

5. Attach Top Panel:
- Align and fix the top panel to the side and back panels using screws or cam locks.

6. Install Doors or Drawers (if applicable):
- Assemble drawers by connecting sides, back, and bottom panels.
- Install drawer slides and insert drawers into the unit.
- For doors, attach hinges to the doors first, then to the frame.

7. Secure and Adjust:
- Tighten all screws and check for stability.
- Adjust door alignment or drawer slides if necessary.

8. Final Checks:
- Ensure the unit is level and stable.
- Attach anti-tip hardware if included.

Always follow the step-by-step instructions provided with the product for safe and correct assembly.

This answer is automatically generated