Kyocera FS-1920 Installation Manual page 29

Push the center as shown in the figure to make space for
4
the developer unit.
Put the developer unit into that space.
5
To reinstall the developer unit into the printer, use the reverse procedure of the above.
®
E S
NERGY TAR
Group for Energy Efficient Appliances (GEEA)
As an E S Partner, we have determined that this product meets the
NERGY TAR
E S guidelines for energy efficiency.
NERGY TAR
The basic objective of the E
lution by encouraging the manufacture and sale of equipment that uses energy
more efficiently.
This printer is equipped with a sleep timer function that conforms with the stan-
dards of the E S
NERGY TAR
the amount of electrical power consumed by the printer. For maximum power
savings, turn off the printer's power supply when not using the printer for
extended periods of time.
For details on the sleep timer function and printer power consumption, refer to
the CD-ROM instruction manual provided with the printer.
Initial settings of the sleep timer function and power saved using the sleep timer
function:
Initial sleep mode setting
15 minutes (30 minutes)
The goal of GEEA is efficient use of energy. This product has a high-efficiency
profile and meets the criteria for receiving the GEEA-Label.
Initial sleep mode setting
15 minutes (30 minutes)
S Program is to reduce environmental pol-
NERGY TAR
Program. This function makes it possible to reduce
Power consumption in sleep mode
5.6 W (30 W) [U.S.A. / Canada]
5.3 W (30 W) [European countries]
( ): E
NERGY
Power Consumption
Power off
0 W (1 W)
Developer Unit
S program guideline
TAR
Sleep mode
5.6 W (30 W)
[U.S.A. / Canada]
5.3 W (30 W)
[European countries]
( ): GEEA criteria
27